Welder - (Outsourced Contractor)
Company
Emirates Global Aluminium
Location
Dubai
Job Type
Contractor
Posted
4 days ago
Via
Emirates Global Aluminium - EGA
Apply On
Job Description
Please note that this role will be under a third-party contractor and is not a direct hire with EGA.
JOB PURPOSE:
• To perform welding operations on various weld joints in all required positions, ensuring high-quality, defect-free welds that meet project specifications and standards.
• To work with Pot Lining Technicians / Operators during cell lining department routine activities particularly pot shell structural repair & superstructure overhauling, live bus bar welding in pot lines and replacement of eroded / damaged cathode flexible during pot turnaround activities under close supervision.
KEY ACCOUNTABILITIES:
• Perform welding tasks using ARC & MIG welding processes (SMAW, FCAW & GMAW) in all positions (flat, horizontal, vertical, overhead).
• Capable to perform welding in high temperature areas and in strong magnetic field of pot lines.
• Ensure welds meet quality standards and are free from defects such as cracks, porosity, and incomplete fusion.
• Perform Gas cutting task, carbon arc gauging and thermal lancing activities.
• Ability to identify industrial tools, welding equipment and carry out pre-operational check prior to use.
• Strictly adhere to EHS safety protocols, company policies and wear required PPEs.
• Maintain all the required equipment, welding machine and tools in good working condition and ensure readily available at work location.
• Must be aware of basic 5S concept and able to identify and correct hazards to provide safe workplace.
• Ensure good housekeeping is maintained at work place all the time and debris are disposed properly in designated skips.
• Seek advice from shift in charge / supervisor about job safety and participate in daily toolbox talk.
• Report any unsafe conditions, incidents, or near misses to the supervisor immediately.
QUALIFICATIONS & SKILLS:
Minimum Qualifications:
• Mandatory qualification and hands-on experience in both ARC & MIG welding processes:
• FCAW (Flux-Cored Arc Welding)
• GMAW (Gas Metal Arc Welding)
• SMAW (Shielded Metal Arc welding)
Skills:
• Proven experience in industrial or construction welding projects.
• Ability to read and interpret Welding Procedure Specification, welding symbols and basic technical drawings.
• Welders Performance Qualification Certificates will be considered an added advantage.
• Must be able to read, write, speak and understand basic English.
• Able to identify industrial tools and equipment by names and their safe usage.
Minimum Experience: Minimum 2 years’ experience as a welder in industry.
JOB PURPOSE:
• To perform welding operations on various weld joints in all required positions, ensuring high-quality, defect-free welds that meet project specifications and standards.
• To work with Pot Lining Technicians / Operators during cell lining department routine activities particularly pot shell structural repair & superstructure overhauling, live bus bar welding in pot lines and replacement of eroded / damaged cathode flexible during pot turnaround activities under close supervision.
KEY ACCOUNTABILITIES:
• Perform welding tasks using ARC & MIG welding processes (SMAW, FCAW & GMAW) in all positions (flat, horizontal, vertical, overhead).
• Capable to perform welding in high temperature areas and in strong magnetic field of pot lines.
• Ensure welds meet quality standards and are free from defects such as cracks, porosity, and incomplete fusion.
• Perform Gas cutting task, carbon arc gauging and thermal lancing activities.
• Ability to identify industrial tools, welding equipment and carry out pre-operational check prior to use.
• Strictly adhere to EHS safety protocols, company policies and wear required PPEs.
• Maintain all the required equipment, welding machine and tools in good working condition and ensure readily available at work location.
• Must be aware of basic 5S concept and able to identify and correct hazards to provide safe workplace.
• Ensure good housekeeping is maintained at work place all the time and debris are disposed properly in designated skips.
• Seek advice from shift in charge / supervisor about job safety and participate in daily toolbox talk.
• Report any unsafe conditions, incidents, or near misses to the supervisor immediately.
QUALIFICATIONS & SKILLS:
Minimum Qualifications:
• Mandatory qualification and hands-on experience in both ARC & MIG welding processes:
• FCAW (Flux-Cored Arc Welding)
• GMAW (Gas Metal Arc Welding)
• SMAW (Shielded Metal Arc welding)
Skills:
• Proven experience in industrial or construction welding projects.
• Ability to read and interpret Welding Procedure Specification, welding symbols and basic technical drawings.
• Welders Performance Qualification Certificates will be considered an added advantage.
• Must be able to read, write, speak and understand basic English.
• Able to identify industrial tools and equipment by names and their safe usage.
Minimum Experience: Minimum 2 years’ experience as a welder in industry.
Frequently Asked Questions
Quick answers about Driver Jobs
What minimum monthly salary must a driver earn in UAE to qualify for a work permit and family sponsorship in 2026?
As per the Ministry of Human Resources and Emiratisation, drivers require a minimum salary of 4,000 AED per month to obtain a work permit and sponsor family members as of 1 January 2026. Overtime must be paid at 1.25 times the hourly rate for hours exceeding 8 per day. This threshold applies uniformly across all emirates for private sector driver roles.
Which specific UAE driving licence categories and RTA approvals are required for commercial driver jobs in 2026?
Drivers must hold a valid UAE commercial heavy or light vehicle licence issued by the Roads and Transport Authority with at least 3 years documented experience as of 2026. The Ministry of Human Resources and Emiratisation requires submission of the RTA licence copy along with the work permit application. No foreign licence conversion is accepted without a minimum 6-month UAE residency period.
How many working hours and annual leave days are mandated for driver positions under UAE labour law in 2026?
The Ministry of Human Resources and Emiratisation sets a maximum of 8 hours per day and 48 hours per week for drivers, with mandatory 30 days annual leave after completing one year of service as of 2026. Drivers receive an additional 10 public holidays and sick leave of 90 days at full or half pay depending on service length. All overtime above 8 hours must be compensated at 1.25 times the basic salary.
What documents are required to apply for a driver work permit in the UAE as of 2026?
Applicants must submit a valid passport, attested educational certificates, RTA commercial driving licence, medical fitness certificate, and Emirates ID application through the Ministry of Human Resources and Emiratisation portal as of 2026. The employer files the application with a signed labour contract specifying 4,000 AED minimum salary. Processing takes 3 to 5 working days after fee payment of 300 AED.
