Welder/Fitter
Company
Trion Technical Oilfield Services LLC
Location
Abu Dhabi
Job Type
Full-time
Posted
6 days ago
Via
Glassdoor
Apply On
Job Description
Welder / Fitter – Roles & Responsibilities
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
Frequently Asked Questions
Quick answers about Driver Jobs
What minimum monthly salary must a driver earn in UAE to qualify for a work permit and family sponsorship in 2026?
As per the Ministry of Human Resources and Emiratisation, drivers require a minimum salary of 4,000 AED per month to obtain a work permit and sponsor family members as of 1 January 2026. Overtime must be paid at 1.25 times the hourly rate for hours exceeding 8 per day. This threshold applies uniformly across all emirates for private sector driver roles.
Which specific UAE driving licence categories and RTA approvals are required for commercial driver jobs in 2026?
Drivers must hold a valid UAE commercial heavy or light vehicle licence issued by the Roads and Transport Authority with at least 3 years documented experience as of 2026. The Ministry of Human Resources and Emiratisation requires submission of the RTA licence copy along with the work permit application. No foreign licence conversion is accepted without a minimum 6-month UAE residency period.
How many working hours and annual leave days are mandated for driver positions under UAE labour law in 2026?
The Ministry of Human Resources and Emiratisation sets a maximum of 8 hours per day and 48 hours per week for drivers, with mandatory 30 days annual leave after completing one year of service as of 2026. Drivers receive an additional 10 public holidays and sick leave of 90 days at full or half pay depending on service length. All overtime above 8 hours must be compensated at 1.25 times the basic salary.
What documents are required to apply for a driver work permit in the UAE as of 2026?
Applicants must submit a valid passport, attested educational certificates, RTA commercial driving licence, medical fitness certificate, and Emirates ID application through the Ministry of Human Resources and Emiratisation portal as of 2026. The employer files the application with a signed labour contract specifying 4,000 AED minimum salary. Processing takes 3 to 5 working days after fee payment of 300 AED.
