Welder/Fabricator/Fitter
Company
Trion Technical Oilfield Services LLC
Location
Abu Dhabi
Job Type
Full-time
Posted
6 days ago
Via
Glassdoor
Apply On
Job Description
Fabricator – Roles & Responsibilities
1. Reading & Understanding Drawings
• Interpret technical drawings, blueprints, and specifications
• Understand dimensions, tolerances, and material requirements
2. Material Preparation
• Select correct materials (MS, GI, SS, plates, pipes, etc.)
• Marking, measuring, and cutting materials as per drawings
3. Fabrication Work
• Perform cutting, grinding, drilling, bending, and fitting
• Assemble components as per design
• Ensure proper alignment and dimensional accuracy
4. Welding & Joining
• Carry out welding (ARC, MIG, TIG as required)
• Ensure strong, clean, and defect-free joints
• Follow WPS (Welding Procedure Specification) if applicable
5. Use of Tools & Equipment
• Operate fabrication machines (cutting machine, drilling machine, rolling, etc.)
• Use hand tools and measuring instruments safely and accurately
6. Quality Control
• Check finished work against drawings and specifications
• Ensure proper finishing, dimensions, and fit-up
• Rectify defects if any
7. Installation Support (if required)
• Assist in site installation and erection work
• Ensure proper fixing and alignment on site
8. Safety Compliance
• Follow safety procedures and PPE requirements
• Maintain clean and safe working environment
9. Maintenance of Tools
• Maintain tools and equipment in good condition
• Report any faults or damages
10. Coordination
• Work with supervisors, engineers, and other team members
• Report progress and any issues during fabrication
Job Type: Full-time
Pay: From AED2,000.00 per month
Work Location: In person
1. Reading & Understanding Drawings
• Interpret technical drawings, blueprints, and specifications
• Understand dimensions, tolerances, and material requirements
2. Material Preparation
• Select correct materials (MS, GI, SS, plates, pipes, etc.)
• Marking, measuring, and cutting materials as per drawings
3. Fabrication Work
• Perform cutting, grinding, drilling, bending, and fitting
• Assemble components as per design
• Ensure proper alignment and dimensional accuracy
4. Welding & Joining
• Carry out welding (ARC, MIG, TIG as required)
• Ensure strong, clean, and defect-free joints
• Follow WPS (Welding Procedure Specification) if applicable
5. Use of Tools & Equipment
• Operate fabrication machines (cutting machine, drilling machine, rolling, etc.)
• Use hand tools and measuring instruments safely and accurately
6. Quality Control
• Check finished work against drawings and specifications
• Ensure proper finishing, dimensions, and fit-up
• Rectify defects if any
7. Installation Support (if required)
• Assist in site installation and erection work
• Ensure proper fixing and alignment on site
8. Safety Compliance
• Follow safety procedures and PPE requirements
• Maintain clean and safe working environment
9. Maintenance of Tools
• Maintain tools and equipment in good condition
• Report any faults or damages
10. Coordination
• Work with supervisors, engineers, and other team members
• Report progress and any issues during fabrication
Job Type: Full-time
Pay: From AED2,000.00 per month
Work Location: In person
Frequently Asked Questions
Quick answers about Welder Jobs
What minimum monthly salary must a welder earn to qualify for a UAE work permit in 2026?
As per the Ministry of Human Resources and Emiratisation, welders require a minimum salary of AED 4,000 per month as of 2026 to obtain a work permit. This threshold applies to skilled trade categories and must be stated in the employment contract. Overtime above 8 hours daily is compensated at 1.25 times the basic hourly rate.
Which visa type and medical test are mandatory for foreign welders entering the UAE in 2026?
As per the Ministry of Human Resources and Emiratisation, foreign welders must obtain a work permit under the skilled worker visa category valid for 2 years as of 2026. Applicants require a negative Emirates ID medical fitness test completed within 30 days of arrival plus a valid passport with 6 months validity.
What education and certification does MOHRE require for welder job eligibility in the UAE?
As per the Ministry of Human Resources and Emiratisation, welders need at minimum a high school certificate plus 2 years documented experience or an internationally recognised welding certificate such as AWS or CSWIP as of 2026. No university degree is mandated for this skilled trade category.
Which documents must welders submit when applying for a UAE job offer in 2026?
As per the Ministry of Human Resources and Emiratisation, welders must upload a valid passport, attested educational certificates, experience letters, and a medical fitness certificate as of 2026. The employer files the application through the MOHRE e-services portal within 60 days of the job offer.
