Welder/Fitter
Company
Trion Technical Oilfield Services LLC
Location
Abu Dhabi
Job Type
Full-time
Posted
6 days ago
Via
Glassdoor
Apply On
Job Description
Welder / Fitter – Roles & Responsibilities
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
Frequently Asked Questions
Quick answers about Welder Jobs
What minimum monthly salary must a welder earn to qualify for a UAE work permit in 2026?
As per the Ministry of Human Resources and Emiratisation, welders require a minimum salary of AED 4,000 per month as of 2026 to obtain a work permit. This threshold applies to skilled trade categories and must be stated in the employment contract. Overtime above 8 hours daily is compensated at 1.25 times the basic hourly rate.
Which visa type and medical test are mandatory for foreign welders entering the UAE in 2026?
As per the Ministry of Human Resources and Emiratisation, foreign welders must obtain a work permit under the skilled worker visa category valid for 2 years as of 2026. Applicants require a negative Emirates ID medical fitness test completed within 30 days of arrival plus a valid passport with 6 months validity.
What education and certification does MOHRE require for welder job eligibility in the UAE?
As per the Ministry of Human Resources and Emiratisation, welders need at minimum a high school certificate plus 2 years documented experience or an internationally recognised welding certificate such as AWS or CSWIP as of 2026. No university degree is mandated for this skilled trade category.
Which documents must welders submit when applying for a UAE job offer in 2026?
As per the Ministry of Human Resources and Emiratisation, welders must upload a valid passport, attested educational certificates, experience letters, and a medical fitness certificate as of 2026. The employer files the application through the MOHRE e-services portal within 60 days of the job offer.
