Welder
Company
Madre Integrated Engineering
Location
Doha
Job Type
Full-time
Posted
9 days ago
Via
via قطر - تنقيب
Apply On
Job Description
Job description
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
Frequently Asked Questions
Quick answers about Driver Jobs
What is the exact minimum wage and overtime rate for heavy vehicle drivers in Qatar as of January 2026?
The Ministry of Labour sets the minimum wage at 1,000 QAR per month plus 300 QAR food allowance and 500 QAR accommodation allowance for all drivers including heavy vehicle roles effective from 2021 and unchanged through 2026. Overtime must be paid at 1.25 times the hourly rate after 8 hours per day or 48 hours per week. Employers must deposit salaries into bank accounts by the 7th of each month.
Which specific visa and work permit steps are required for Indian drivers applying to Qatar jobs in 2026?
Indian drivers must obtain a Qatar work visa sponsored by the employer through the Ministry of Labour e-services portal before arrival, followed by medical fitness test and Qatar ID issuance within 90 days. The visa fee is 200 QAR and the process requires a valid passport, attested degree or experience certificate, and police clearance from India dated within 6 months. No self-sponsored driver visas are permitted.
How many years of experience and what education level are mandatory for light vehicle driver positions in Qatar?
Applicants need a minimum of 2 years documented driving experience in the past 5 years plus a valid home country driving licence converted to Qatar licence within 6 months of arrival. No formal education beyond secondary school is required but the employer must verify experience via attested documents submitted to the Ministry of Labour.
What exact documents must be uploaded for a driver job application through Qatar's official portal in 2026?
The Ministry of Labour requires upload of passport valid for at least 6 months, attested educational or experience certificates, recent passport photos, and a medical certificate from an approved centre. All documents must be in PDF format under 2 MB each and submitted via the employer’s account on the Mol e-services system before visa issuance.
