Welding | Welder
Company
Feldmeier Equipment Inc.
Location
New York, NY
Job Type
Full-time
Posted
5 days ago
Via
via Jooble
Apply On
Job Description
Description
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Frequently Asked Questions
Quick answers about Cleaning Staff Jobs
What is the federal minimum wage for cleaning staff jobs in the United States as of 2026?
As per the U.S. Department of Labor, the federal minimum wage for cleaning staff jobs in the United States is $7.25 per hour as of January 1, 2026. Employers must pay overtime at 1.5 times the regular rate for all hours worked over 40 in a workweek.
How many hours per week can cleaning staff legally work without overtime pay in the United States in 2026?
As per the U.S. Department of Labor, cleaning staff must receive overtime pay after 40 hours worked in a workweek at 1.5 times their regular rate as of 2026. The standard workweek is defined as any fixed recurring 168-hour period.
What visa options exist for international applicants seeking cleaning staff jobs in the United States in 2026?
As per U.S. Citizenship and Immigration Services, international applicants for cleaning staff jobs may qualify for H-2B visas with a maximum of 66,000 visas available annually for fiscal year 2026. Employers must first obtain a temporary labor certification from the Department of Labor.
What documents are required to apply for cleaning staff jobs through official U.S. government channels in 2026?
As per the U.S. Department of Labor, applicants need a completed I-9 form for employment eligibility verification and a valid Social Security number. No specific education documents are mandated for entry-level cleaning positions.
