Stick Welders
Company
Hutco Inc
Location
Houston, TX
Job Type
Full-time
Salary
20 an hour
Via
via ZipRecruiter
Job Description
HUTCO, INC.
Position: Welder
Job Location: Brady Island / Channelview, TX
Hutco Branch: Houston, TX
Rate of Pay: $20.00 per hour, depending on skills test results.
DESCRIPTION:
Currently seeking Welders to work in Houston, Texas. To be considered for this Welder opportunity, you must have at least 2 years of experience in stick welding.
REQUIREMENTS:
• Must be able to pass hands-on certification tests.
TOOLS ARE REQUIRED FOR TESTING:
•Welding Hood (connects to Hard hat)
•Welding Gloves
•Chipping Hammer
•Steel Toe Boots
•Long – Sleeve Shirt
•Long Pants
•Stinger/ Electrode Holder with Male Connector (SMAW)
•Pliers / Cutters (FCAW)
•Safety Glasses
•Wire Brush
ESSENTIAL JOB FUNCTIONS:
• Must have knowledge of equipment, work processes, and techniques used for this role including the ability to perform all functions of the position in conformity with applicable regulations and generally observed safety practices.
• Enter and move through manholes to reach and work in internally confined spaces.
• Manipulate and transport loads up to 50 pounds over distances of up to 200 feet approximately 1 to 6 times during each 8 hour shift, occasionally 75 pounds.
• Manipulate and operate all machines and tools essential to the performance of the position of Structural Welder.
• Traverse gangways and scaffolding at varying heights.
• Traverse and negotiate uneven surfaces and uneven heights between dock and vessel.
• Stooping, squatting, twisting, kneeling, lifting, and reaching.
BENEFITS:
A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include:
• Medical / Prescription
• Dental Coverage
• Vision Coverage
• Short Term Disability Benefits
• Term Life Benefits
• Accidental Death & Dismemberment Benefit
CONTACT HUTCO TODAY!
Apply Online:
www.hutcoinc.com
Office:
8306 Broadway
Houston, Tx. 77061
Send resumes to:
[email protected] George Cumpian 832-444-8125
[email protected] Aleckzander Borg 832-872-0838
Or call us at:
Office - (713) 640-1705
Se habla Español
Hutco, Inc. is an Equal Opportunity Employer (EOE).
#HUTCOSP
Position: Welder
Job Location: Brady Island / Channelview, TX
Hutco Branch: Houston, TX
Rate of Pay: $20.00 per hour, depending on skills test results.
DESCRIPTION:
Currently seeking Welders to work in Houston, Texas. To be considered for this Welder opportunity, you must have at least 2 years of experience in stick welding.
REQUIREMENTS:
• Must be able to pass hands-on certification tests.
TOOLS ARE REQUIRED FOR TESTING:
•Welding Hood (connects to Hard hat)
•Welding Gloves
•Chipping Hammer
•Steel Toe Boots
•Long – Sleeve Shirt
•Long Pants
•Stinger/ Electrode Holder with Male Connector (SMAW)
•Pliers / Cutters (FCAW)
•Safety Glasses
•Wire Brush
ESSENTIAL JOB FUNCTIONS:
• Must have knowledge of equipment, work processes, and techniques used for this role including the ability to perform all functions of the position in conformity with applicable regulations and generally observed safety practices.
• Enter and move through manholes to reach and work in internally confined spaces.
• Manipulate and transport loads up to 50 pounds over distances of up to 200 feet approximately 1 to 6 times during each 8 hour shift, occasionally 75 pounds.
• Manipulate and operate all machines and tools essential to the performance of the position of Structural Welder.
• Traverse gangways and scaffolding at varying heights.
• Traverse and negotiate uneven surfaces and uneven heights between dock and vessel.
• Stooping, squatting, twisting, kneeling, lifting, and reaching.
BENEFITS:
A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include:
• Medical / Prescription
• Dental Coverage
• Vision Coverage
• Short Term Disability Benefits
• Term Life Benefits
• Accidental Death & Dismemberment Benefit
CONTACT HUTCO TODAY!
Apply Online:
www.hutcoinc.com
Office:
8306 Broadway
Houston, Tx. 77061
Send resumes to:
[email protected] George Cumpian 832-444-8125
[email protected] Aleckzander Borg 832-872-0838
Or call us at:
Office - (713) 640-1705
Se habla Español
Hutco, Inc. is an Equal Opportunity Employer (EOE).
#HUTCOSP
Frequently Asked Questions
Quick answers about Driver Jobs
What is the federal minimum wage and overtime rate for truck drivers in the United States as of 2026?
As per the U.S. Department of Labor, the federal minimum wage for drivers is $7.25 per hour in 2026 with overtime required at 1.5 times the rate after 40 hours in a workweek for non-exempt employees. Most interstate truck drivers must also follow FMCSA hours-of-service rules limiting driving to 11 hours per day. Employers must pay at least this rate regardless of state variations.
What visa is required for foreign nationals to work as commercial drivers in the United States in 2026?
As per U.S. Citizenship and Immigration Services, foreign drivers typically need an H-2B visa for non-agricultural temporary work or a TN visa under USMCA for Canadian or Mexican citizens with a valid CDL. Applicants must have a job offer from a U.S. employer who files Form I-129 and pay the $460 filing fee as of 2026. The visa allows stays up to 3 years with possible extensions.
What are the exact eligibility requirements including age and license for interstate truck driver jobs in 2026?
As per the Federal Motor Carrier Safety Administration, drivers must be at least 21 years old, hold a valid Class A CDL, and pass a DOT physical exam valid for 24 months. They also need to complete entry-level driver training of at least 30 hours behind the wheel before 2026. No felony convictions in the past 7 years for certain offenses are allowed.
What documents are needed to apply for a commercial driver's license for driver jobs in 2026?
As per the Federal Motor Carrier Safety Administration, applicants must submit proof of identity with a birth certificate or passport, Social Security number verification, and a valid medical examiner's certificate dated within the last 24 months. They also need to provide proof of residency and pass both knowledge and skills tests at a state DMV. The application fee averages $75 depending on the state.
