Pipe Welders Needed
Company
Labor One Staffing
Location
Los Angeles, CA
Via
ZipRecruiter
Apply On
Job Description
Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard.
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
Frequently Asked Questions
Quick answers about Driver Jobs
What is the federal minimum wage and overtime rate for truck drivers in the United States as of 2026?
As per the U.S. Department of Labor, the federal minimum wage for drivers is $7.25 per hour in 2026 with overtime required at 1.5 times the rate after 40 hours in a workweek for non-exempt employees. Most interstate truck drivers must also follow FMCSA hours-of-service rules limiting driving to 11 hours per day. Employers must pay at least this rate regardless of state variations.
What visa is required for foreign nationals to work as commercial drivers in the United States in 2026?
As per U.S. Citizenship and Immigration Services, foreign drivers typically need an H-2B visa for non-agricultural temporary work or a TN visa under USMCA for Canadian or Mexican citizens with a valid CDL. Applicants must have a job offer from a U.S. employer who files Form I-129 and pay the $460 filing fee as of 2026. The visa allows stays up to 3 years with possible extensions.
What are the exact eligibility requirements including age and license for interstate truck driver jobs in 2026?
As per the Federal Motor Carrier Safety Administration, drivers must be at least 21 years old, hold a valid Class A CDL, and pass a DOT physical exam valid for 24 months. They also need to complete entry-level driver training of at least 30 hours behind the wheel before 2026. No felony convictions in the past 7 years for certain offenses are allowed.
What documents are needed to apply for a commercial driver's license for driver jobs in 2026?
As per the Federal Motor Carrier Safety Administration, applicants must submit proof of identity with a birth certificate or passport, Social Security number verification, and a valid medical examiner's certificate dated within the last 24 months. They also need to provide proof of residency and pass both knowledge and skills tests at a state DMV. The application fee averages $75 depending on the state.
