Welding | Welder
Company
Feldmeier Equipment Inc.
Location
New York, NY
Job Type
Full-time
Posted
5 days ago
Via
via Jooble
Apply On
Job Description
Description
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Frequently Asked Questions
Quick answers about Driver Jobs
What is the federal minimum wage and overtime rate for truck drivers in the United States as of 2026?
As per the U.S. Department of Labor, the federal minimum wage for drivers is $7.25 per hour in 2026 with overtime required at 1.5 times the rate after 40 hours in a workweek for non-exempt employees. Most interstate truck drivers must also follow FMCSA hours-of-service rules limiting driving to 11 hours per day. Employers must pay at least this rate regardless of state variations.
What visa is required for foreign nationals to work as commercial drivers in the United States in 2026?
As per U.S. Citizenship and Immigration Services, foreign drivers typically need an H-2B visa for non-agricultural temporary work or a TN visa under USMCA for Canadian or Mexican citizens with a valid CDL. Applicants must have a job offer from a U.S. employer who files Form I-129 and pay the $460 filing fee as of 2026. The visa allows stays up to 3 years with possible extensions.
What are the exact eligibility requirements including age and license for interstate truck driver jobs in 2026?
As per the Federal Motor Carrier Safety Administration, drivers must be at least 21 years old, hold a valid Class A CDL, and pass a DOT physical exam valid for 24 months. They also need to complete entry-level driver training of at least 30 hours behind the wheel before 2026. No felony convictions in the past 7 years for certain offenses are allowed.
What documents are needed to apply for a commercial driver's license for driver jobs in 2026?
As per the Federal Motor Carrier Safety Administration, applicants must submit proof of identity with a birth certificate or passport, Social Security number verification, and a valid medical examiner's certificate dated within the last 24 months. They also need to provide proof of residency and pass both knowledge and skills tests at a state DMV. The application fee averages $75 depending on the state.
