Tank Welder (Req #: 6425)
Company
PALA Interstate, LLC
Location
Houston, TX
Job Type
Full-time
Posted
4 days ago
Via
via Jobs In Welding
Apply On
Job Description
Date Posted: 04/28/2026
Location: Houston, TX
Job Category: Basic Application (PALA)
Salary Interval: Full Time
Pay Range: N/A
The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.
PALA Interstate, LLC
Summary
Lays out, fits and welds together metal components of such products as pipelines, boilers, tanks, structural steel and vehicles.
Reads, studies and interprets job specifications, plans and blue prints. Uses basic math skills including geometry, trigonometry to make calculations for work. Can complete difficult job tasks according to job specifications with minimal or no supervision.
Essential Functions
• Ability to understand and follow all safety rules and to set an example in Safety, Quality, and Production. Measurable criteria will be used in these areas to determine classification.
• Ability to weld to Section 9 of ASME Code in all positions.
• Operations of air arc-gouging and burning torch that requires limited grinding to complete welding process.
• Operation of all air and electric power tools used in a normal tank repair.
• Ability to recognize the proper fit up of weld joints and ability to understand and follow the outlined method of welding.
• Exemplify proper techniques of rigging.
• Understand the proper use of key plates and fit up equipment to control banding and peaking in horizontal and vertical seams.
• Ability to weld approximately 180 linear feet of acceptable seal pass weld using 5P 3/16" electrodes.
• Ability to weld approximately 250 linear feet of acceptable jet weld on 3/16" and 1/4" CS lap weld using 7024-1 electrodes.
• Ability to weld approximately 130 linear feet of completed 3/8" comer weld using 7/32" 7018 electrodes.
• Ability to weld linear feet of vertical and horizontal weld for the following thickness using 7018 electrodes (completed weld):
• Ability to complete items 8 - 10 with no more than 30 minutes of pickup work per day.*Buttering has not been included.
• *Buttering has not been included.
• Ability to complete item 11 with an acceptable RT rate of 95% or higher.
• Ability to work at elevations above ground level using vertical ladders positioned on tank scaffold and ability to work in shell buggies.
• Ability to perform work under breathing air conditions using required respirator.
• Willingness to perform other tank duties on an as needed basis.
• Ability to work in confined space.
• Operation of a Man-Lift.
Required Education and Experience:
• Minimum three years' experience in welding with SMAW, GTAW, and Flux Core process.
• Must pass required welding test as required by the specific job site.
Preferred Education and Experience
• High School or GED preferred but not required.
• Trade School program preferred but not required.
PALA Group, Inc. and its Subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
PI284194095
Location: Houston, TX
Job Category: Basic Application (PALA)
Salary Interval: Full Time
Pay Range: N/A
The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.
PALA Interstate, LLC
Summary
Lays out, fits and welds together metal components of such products as pipelines, boilers, tanks, structural steel and vehicles.
Reads, studies and interprets job specifications, plans and blue prints. Uses basic math skills including geometry, trigonometry to make calculations for work. Can complete difficult job tasks according to job specifications with minimal or no supervision.
Essential Functions
• Ability to understand and follow all safety rules and to set an example in Safety, Quality, and Production. Measurable criteria will be used in these areas to determine classification.
• Ability to weld to Section 9 of ASME Code in all positions.
• Operations of air arc-gouging and burning torch that requires limited grinding to complete welding process.
• Operation of all air and electric power tools used in a normal tank repair.
• Ability to recognize the proper fit up of weld joints and ability to understand and follow the outlined method of welding.
• Exemplify proper techniques of rigging.
• Understand the proper use of key plates and fit up equipment to control banding and peaking in horizontal and vertical seams.
• Ability to weld approximately 180 linear feet of acceptable seal pass weld using 5P 3/16" electrodes.
• Ability to weld approximately 250 linear feet of acceptable jet weld on 3/16" and 1/4" CS lap weld using 7024-1 electrodes.
• Ability to weld approximately 130 linear feet of completed 3/8" comer weld using 7/32" 7018 electrodes.
• Ability to weld linear feet of vertical and horizontal weld for the following thickness using 7018 electrodes (completed weld):
• Ability to complete items 8 - 10 with no more than 30 minutes of pickup work per day.*Buttering has not been included.
• *Buttering has not been included.
• Ability to complete item 11 with an acceptable RT rate of 95% or higher.
• Ability to work at elevations above ground level using vertical ladders positioned on tank scaffold and ability to work in shell buggies.
• Ability to perform work under breathing air conditions using required respirator.
• Willingness to perform other tank duties on an as needed basis.
• Ability to work in confined space.
• Operation of a Man-Lift.
Required Education and Experience:
• Minimum three years' experience in welding with SMAW, GTAW, and Flux Core process.
• Must pass required welding test as required by the specific job site.
Preferred Education and Experience
• High School or GED preferred but not required.
• Trade School program preferred but not required.
PALA Group, Inc. and its Subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
PI284194095
Frequently Asked Questions
Quick answers about Security Guard Jobs
What is the federal minimum wage for security guard jobs in the United States in 2026?
As per the U.S. Department of Labor, the minimum wage for security guards in the United States is $7.25 per hour as of January 1 2026. Non-exempt security guards must receive overtime at 1.5 times the regular rate for all hours over 40 in a workweek under the Fair Labor Standards Act.
How many hours per week can a security guard work before overtime applies in 2026?
As per the U.S. Department of Labor, security guards receive overtime after 40 hours in a workweek at 1.5 times their regular rate as of 2026. Employers must pay this rate for every additional hour and maintain records for at least three years.
What education and experience are required to qualify for security guard jobs in the United States?
As per the U.S. Department of Labor, most security guard positions require a high school diploma or equivalent and no prior experience as of 2026. Employers often provide on-the-job training lasting 1 to 3 weeks before assignment.
What documents are needed to apply for a security guard job in the United States in 2026?
As per the U.S. Department of Labor, applicants must provide a valid government-issued photo ID, Social Security card, and completed Form I-9 by the first day of employment as of 2026. Many states also require submission of a state-issued guard registration card before starting work.
