Semi-Skilled Plastic Welder
Company
UMULIG ENGINEERING
Location
City of Johannesburg Metropolitan Municipality
Posted
15 days ago
Via
via BeBee
Apply On
Job Description
Semi-Skilled Plastic Welder X 1
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: [email protected] The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: [email protected] The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
Frequently Asked Questions
Quick answers about Driver Jobs
What is the minimum wage for Driver Jobs in South Africa in 2026?
As per the Department of Employment and Labour, the minimum wage for drivers in South Africa is R32.45 per hour from 1 March 2026 under the National Minimum Wage Act. Drivers working more than 45 hours per week must receive overtime pay at 1.5 times the hourly rate. This applies to all Code 08, 10 and 14 licence holders in the road freight and passenger sectors.
Do I need a Professional Driving Permit to apply for Driver Jobs in South Africa?
As per the Department of Employment and Labour, all drivers of vehicles over 3 500 kg or carrying passengers for reward must hold a valid Professional Driving Permit (PrDP) renewed every five years. Applicants must submit a valid South African ID, medical certificate and police clearance at any Driving Licence Testing Centre. Without a PrDP, employment contracts are invalid under the National Road Traffic Act.
What documents are required to apply for Driver Jobs through the Department of Employment and Labour in 2026?
As per the Department of Employment and Labour, applicants must submit a certified copy of ID, valid driving licence with PrDP, proof of residence, and a completed Z83 form or online profile on the ESSA system. Applications are processed within 14 working days at labour centres nationwide. No application fee is charged for registration on the public employment database.
What are the standard working hours and leave entitlements for drivers in South Africa?
As per the Department of Employment and Labour, drivers may work a maximum of 45 ordinary hours per week with at least 36 consecutive hours of rest. Annual leave is 15 working days after the first year of employment, plus 10 public holidays and sick leave of 30 days over a three-year cycle. Night shift drivers receive an additional R4.50 per hour allowance from March 2026.
