Junior Boilermaker/welder
Company
Career Crew
Location
Pretoria
Posted
5 days ago
Via
Jobs - South Africa | Trabajo.org
Job Description
JUNIOR WELDER BOILERMAKER:
- Fabrication, assemblies
- Oversee welding, read drawings
- Check that jobs are square
- Mild steel experience
A company based in Gauteng is looking for a semiskilled welder boilermaker at its Bronkhorstspruit department to carry out planned and unplanned maintenance and repair work, fabrication of required spare parts and installation, attend to breakdowns, perform standby duties, and attend to callouts timeously to reduce unplanned downtime.
• *The key performance requirements for the position are**:
Participate in health and safety meetings.
Find, report, unsafe, unhealthy and environmentally unfriendly conditions.
Ensure that all relevant procedures are complied with.
Incidents and near misses are reported, investigated and closed out.
Hazardous substances stored, handled, and disposed as per procedure.
Supply suggestions towards improving safety in the working environment.
Permit to work and safe work procedures are followed for all work.
Ensure proper use of personal protective equipment and keep good housekeeping standards always.
• *Delivery and Quality**
Carry out planned maintenance work as per schedules and within stipulated time frames.
Report all anomalies findings of planned and adhoc inspections to the manger and carry out subsequent corrective actions.
Ensure that all breakdown work is carried out within minimum time and in a safe manner and to the highest level of quality.
Participate in shutdown planning by bringing to the attention of the coordinator all equipment related issues that require attention when plant is down.
Participate in the development of safe working procedures and risk assessment.
Ensure spare parts for area of responsibility are maintained to the highest level of cleanliness and quality.
Provide factual and relevant information to assist in solving equipment failure related problems.
Ensure correct welding procedures and consumables are used during maintenance and repair jobs.
• *Continuous Improvement**
Identify possible opportunities to improve workshop reliability and availability.
Execute scheduled maintenance checks.
• *Technical and Functional Competencies**
Knowledge and demonstratable experience in the areas listed below is a key requirement.
Welding consumables
Welding techniques
Welding equipment
Hand tools
Fabrication
Grinding and cutting
Control precision
Trouble shooting
Read drawings.
Basic knowledge of mechanical principles
Ability to plan.
Strong problem-solving skills.
• *Desired Experience Qualification**
Grade 12 Required
N3 in Welding Boilermaking with a Trade Test Required
N4 and higher Advantageous with a Trade Test.
• *Requirements
- Minimum education level: Certificate**
Availability to travel: No
Availability of change of residence: No
• *Must reside in Mooiplaats and surrounding areas.
- Fabrication, assemblies
- Oversee welding, read drawings
- Check that jobs are square
- Mild steel experience
A company based in Gauteng is looking for a semiskilled welder boilermaker at its Bronkhorstspruit department to carry out planned and unplanned maintenance and repair work, fabrication of required spare parts and installation, attend to breakdowns, perform standby duties, and attend to callouts timeously to reduce unplanned downtime.
• *The key performance requirements for the position are**:
Participate in health and safety meetings.
Find, report, unsafe, unhealthy and environmentally unfriendly conditions.
Ensure that all relevant procedures are complied with.
Incidents and near misses are reported, investigated and closed out.
Hazardous substances stored, handled, and disposed as per procedure.
Supply suggestions towards improving safety in the working environment.
Permit to work and safe work procedures are followed for all work.
Ensure proper use of personal protective equipment and keep good housekeeping standards always.
• *Delivery and Quality**
Carry out planned maintenance work as per schedules and within stipulated time frames.
Report all anomalies findings of planned and adhoc inspections to the manger and carry out subsequent corrective actions.
Ensure that all breakdown work is carried out within minimum time and in a safe manner and to the highest level of quality.
Participate in shutdown planning by bringing to the attention of the coordinator all equipment related issues that require attention when plant is down.
Participate in the development of safe working procedures and risk assessment.
Ensure spare parts for area of responsibility are maintained to the highest level of cleanliness and quality.
Provide factual and relevant information to assist in solving equipment failure related problems.
Ensure correct welding procedures and consumables are used during maintenance and repair jobs.
• *Continuous Improvement**
Identify possible opportunities to improve workshop reliability and availability.
Execute scheduled maintenance checks.
• *Technical and Functional Competencies**
Knowledge and demonstratable experience in the areas listed below is a key requirement.
Welding consumables
Welding techniques
Welding equipment
Hand tools
Fabrication
Grinding and cutting
Control precision
Trouble shooting
Read drawings.
Basic knowledge of mechanical principles
Ability to plan.
Strong problem-solving skills.
• *Desired Experience Qualification**
Grade 12 Required
N3 in Welding Boilermaking with a Trade Test Required
N4 and higher Advantageous with a Trade Test.
• *Requirements
- Minimum education level: Certificate**
Availability to travel: No
Availability of change of residence: No
• *Must reside in Mooiplaats and surrounding areas.
Frequently Asked Questions
Quick answers about Electrician Jobs
What is the minimum wage for Electrician Jobs in South Africa in 2026?
As per the Department of Employment and Labour, the national minimum wage for electricians in South Africa is R28.79 per hour as of 1 March 2026. Electricians working more than 45 hours per week must receive 1.5 times this rate for overtime. This applies to all registered electrical contractors under the Basic Conditions of Employment Act.
What qualifications and experience are required to work as an electrician in South Africa?
As per the Department of Employment and Labour, applicants need an NQF Level 4 electrical engineering certificate plus a completed trade test at a registered trade test centre. A minimum of 3 years relevant experience is required before the trade test, with registration on the National Artisan Database mandatory from 1 January 2026.
What documents are needed to apply for electrician jobs through the Department of Employment and Labour in 2026?
As per the Department of Employment and Labour, applicants must submit a certified ID copy, NQF Level 4 certificate, trade test results, and proof of 3 years experience via the ESSA online portal. Applications without a valid Certificate of Compliance number are rejected immediately.
What are the standard working hours and leave benefits for electricians in South Africa?
As per the Department of Employment and Labour, electricians work 45 hours per week with 21 consecutive days of annual leave after 12 months of service as of 2026. Sick leave is 36 days over a 3-year cycle and family responsibility leave is 3 days per year.
