Junior Boilermaker/welder
Company
Career Crew
Location
Pretoria
Posted
5 days ago
Via
Jobs - South Africa | Trabajo.org
Job Description
JUNIOR WELDER BOILERMAKER:
- Fabrication, assemblies
- Oversee welding, read drawings
- Check that jobs are square
- Mild steel experience
A company based in Gauteng is looking for a semiskilled welder boilermaker at its Bronkhorstspruit department to carry out planned and unplanned maintenance and repair work, fabrication of required spare parts and installation, attend to breakdowns, perform standby duties, and attend to callouts timeously to reduce unplanned downtime.
• *The key performance requirements for the position are**:
Participate in health and safety meetings.
Find, report, unsafe, unhealthy and environmentally unfriendly conditions.
Ensure that all relevant procedures are complied with.
Incidents and near misses are reported, investigated and closed out.
Hazardous substances stored, handled, and disposed as per procedure.
Supply suggestions towards improving safety in the working environment.
Permit to work and safe work procedures are followed for all work.
Ensure proper use of personal protective equipment and keep good housekeeping standards always.
• *Delivery and Quality**
Carry out planned maintenance work as per schedules and within stipulated time frames.
Report all anomalies findings of planned and adhoc inspections to the manger and carry out subsequent corrective actions.
Ensure that all breakdown work is carried out within minimum time and in a safe manner and to the highest level of quality.
Participate in shutdown planning by bringing to the attention of the coordinator all equipment related issues that require attention when plant is down.
Participate in the development of safe working procedures and risk assessment.
Ensure spare parts for area of responsibility are maintained to the highest level of cleanliness and quality.
Provide factual and relevant information to assist in solving equipment failure related problems.
Ensure correct welding procedures and consumables are used during maintenance and repair jobs.
• *Continuous Improvement**
Identify possible opportunities to improve workshop reliability and availability.
Execute scheduled maintenance checks.
• *Technical and Functional Competencies**
Knowledge and demonstratable experience in the areas listed below is a key requirement.
Welding consumables
Welding techniques
Welding equipment
Hand tools
Fabrication
Grinding and cutting
Control precision
Trouble shooting
Read drawings.
Basic knowledge of mechanical principles
Ability to plan.
Strong problem-solving skills.
• *Desired Experience Qualification**
Grade 12 Required
N3 in Welding Boilermaking with a Trade Test Required
N4 and higher Advantageous with a Trade Test.
• *Requirements
- Minimum education level: Certificate**
Availability to travel: No
Availability of change of residence: No
• *Must reside in Mooiplaats and surrounding areas.
- Fabrication, assemblies
- Oversee welding, read drawings
- Check that jobs are square
- Mild steel experience
A company based in Gauteng is looking for a semiskilled welder boilermaker at its Bronkhorstspruit department to carry out planned and unplanned maintenance and repair work, fabrication of required spare parts and installation, attend to breakdowns, perform standby duties, and attend to callouts timeously to reduce unplanned downtime.
• *The key performance requirements for the position are**:
Participate in health and safety meetings.
Find, report, unsafe, unhealthy and environmentally unfriendly conditions.
Ensure that all relevant procedures are complied with.
Incidents and near misses are reported, investigated and closed out.
Hazardous substances stored, handled, and disposed as per procedure.
Supply suggestions towards improving safety in the working environment.
Permit to work and safe work procedures are followed for all work.
Ensure proper use of personal protective equipment and keep good housekeeping standards always.
• *Delivery and Quality**
Carry out planned maintenance work as per schedules and within stipulated time frames.
Report all anomalies findings of planned and adhoc inspections to the manger and carry out subsequent corrective actions.
Ensure that all breakdown work is carried out within minimum time and in a safe manner and to the highest level of quality.
Participate in shutdown planning by bringing to the attention of the coordinator all equipment related issues that require attention when plant is down.
Participate in the development of safe working procedures and risk assessment.
Ensure spare parts for area of responsibility are maintained to the highest level of cleanliness and quality.
Provide factual and relevant information to assist in solving equipment failure related problems.
Ensure correct welding procedures and consumables are used during maintenance and repair jobs.
• *Continuous Improvement**
Identify possible opportunities to improve workshop reliability and availability.
Execute scheduled maintenance checks.
• *Technical and Functional Competencies**
Knowledge and demonstratable experience in the areas listed below is a key requirement.
Welding consumables
Welding techniques
Welding equipment
Hand tools
Fabrication
Grinding and cutting
Control precision
Trouble shooting
Read drawings.
Basic knowledge of mechanical principles
Ability to plan.
Strong problem-solving skills.
• *Desired Experience Qualification**
Grade 12 Required
N3 in Welding Boilermaking with a Trade Test Required
N4 and higher Advantageous with a Trade Test.
• *Requirements
- Minimum education level: Certificate**
Availability to travel: No
Availability of change of residence: No
• *Must reside in Mooiplaats and surrounding areas.
Frequently Asked Questions
Quick answers about Packing Staff Jobs
What is the minimum wage for Packing Staff Jobs in South Africa in 2026?
As per the Department of Employment and Labour, the national minimum wage for packing staff in South Africa is R27.58 per hour as of 1 March 2026. This equates to R5,375.10 per month for a 45-hour work week, with overtime paid at 1.5 times the rate after 45 hours.
What education and experience are required for packing staff jobs in South Africa?
As per the Department of Employment and Labour, packing staff roles require a Grade 10 certificate or equivalent and no prior experience for entry-level positions. Applicants must be at least 18 years old and pass a basic medical fitness test for warehouse environments.
What documents are needed to apply for packing staff jobs in South Africa?
As per the Department of Employment and Labour, applicants must submit a valid South African ID, proof of address, bank details, and a signed employment contract within 7 days of starting. Foreign nationals require a valid work visa and asylum seeker permit if applicable.
What are the working hours, leave entitlements and benefits for packing staff in South Africa?
As per the Department of Employment and Labour, packing staff work a maximum of 45 hours per week with 21 consecutive days of annual leave after 12 months of service. Employees receive 3 days family responsibility leave and UIF contributions of 1% from both employer and employee.
