Qualified Plumber
Company
Recruite Agency
Location
Kariega
Posted
3 days ago
Via
via Jooble
Apply On
Job Description
We have an opening for a Qualified Plumber at a well-established plumbing firm in Uitenhage, Eastern Cape. This position is suitable for a recently qualified plumber or one nearing the end of apprenticeship seeking further hands-on experience under senior guidance. A structured mentorship programme and registration support is provided.
Responsibilities
Installation & Site Execution
• Cut, thread, bend, and join copper, galvanised steel, HDPE, and PVC pipes using soldering, brazing, compression, crimping, and solvent welding techniques, pressure-testing all joints before concealing pipework in walls, floors, or underground.
• Read and interpret plumbing drawings, isometric diagrams, specifications, and bills of quantities to determine pipe routes, fixture positions, material take-offs, and the correct sequence of installation activities before commencing any work on site.
• Install, connect, and commission water supply, drainage, sanitary fixtures, geysers, and hot water reticulation systems in accordance with SANS 10252 and SANS 10254 plumbing standards and approved building plans for residential and commercial projects.
Health, Safety & Compliance
• Ensure all plumbing work is carried out in strict compliance with the Occupational Health and Safety Act and Construction Regulations, including the use of required PPE, safe excavation practices, and confined space entry procedures when working in manholes and underground chambers.
• Issue Certificates of Compliance for plumbing installations upon completion of work, confirming that all systems have been pressure-tested, meet SANS 10254 requirements, and are safe for connection to municipal water supply and drainage networks before final sign-off.
• Maintain a clean and hazard-free work area by cordoning off work zones, displaying appropriate warning signage, containing water spills and debris during repairs, and thoroughly cleaning up after completing work at client premises to leave the site safe and presentable.
Team Supervision & Quality Control
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
• Review completed job cards and site reports to verify that all work has been carried out to specification, materials used are correctly recorded, and the installation is ready for handover and client sign-off with a fully compliant Certificate of Compliance.
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
Requirements
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
• Registration with the Plumbing Industry Registration Board or eligibility to register for qualified plumber positions.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Thorough knowledge of SANS plumbing codes and regulations governing water supply and drainage installations.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• A valid driver's licence is essential for roles requiring travel to multiple sites or call-out response.
Qualifications
Certificate in Drainage Systems and CCTV Inspection
Responsibilities
Installation & Site Execution
• Cut, thread, bend, and join copper, galvanised steel, HDPE, and PVC pipes using soldering, brazing, compression, crimping, and solvent welding techniques, pressure-testing all joints before concealing pipework in walls, floors, or underground.
• Read and interpret plumbing drawings, isometric diagrams, specifications, and bills of quantities to determine pipe routes, fixture positions, material take-offs, and the correct sequence of installation activities before commencing any work on site.
• Install, connect, and commission water supply, drainage, sanitary fixtures, geysers, and hot water reticulation systems in accordance with SANS 10252 and SANS 10254 plumbing standards and approved building plans for residential and commercial projects.
Health, Safety & Compliance
• Ensure all plumbing work is carried out in strict compliance with the Occupational Health and Safety Act and Construction Regulations, including the use of required PPE, safe excavation practices, and confined space entry procedures when working in manholes and underground chambers.
• Issue Certificates of Compliance for plumbing installations upon completion of work, confirming that all systems have been pressure-tested, meet SANS 10254 requirements, and are safe for connection to municipal water supply and drainage networks before final sign-off.
• Maintain a clean and hazard-free work area by cordoning off work zones, displaying appropriate warning signage, containing water spills and debris during repairs, and thoroughly cleaning up after completing work at client premises to leave the site safe and presentable.
Team Supervision & Quality Control
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
• Review completed job cards and site reports to verify that all work has been carried out to specification, materials used are correctly recorded, and the installation is ready for handover and client sign-off with a fully compliant Certificate of Compliance.
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
Requirements
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
• Registration with the Plumbing Industry Registration Board or eligibility to register for qualified plumber positions.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Thorough knowledge of SANS plumbing codes and regulations governing water supply and drainage installations.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• A valid driver's licence is essential for roles requiring travel to multiple sites or call-out response.
Qualifications
Certificate in Drainage Systems and CCTV Inspection
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum hourly wage for qualified plumbers in South Africa from 1 March 2026?
The Department of Employment and Labour sets the National Minimum Wage at R28.79 per hour for plumbers as of 1 March 2026. This applies to all Sectoral Determination 13 workers with overtime paid at 1.5 times the rate after 45 hours per week. Employers must display the wage schedule at every workplace.
Which trade test certificate is required to legally work as a plumber in South Africa in 2026?
Candidates must hold a Red Seal trade certificate issued after passing the QCTO trade test at an accredited centre. The certificate number must be registered on the National Artisan Database by 31 December 2025 for 2026 employment. No plumber may be employed without this qualification under the Skills Development Act.
How many annual leave days and sick leave days are plumbers entitled to under the Basic Conditions of Employment Act in 2026?
Plumbers receive 21 consecutive days of paid annual leave after 12 months of employment and 30 days of paid sick leave over a 36-month cycle. The leave must be taken within 6 months after the leave cycle ends or it is forfeited.
What documents must be submitted when applying for a plumber position through the Department of Employment and Labour in 2026?
Applicants must submit a certified ID copy, Red Seal certificate, proof of residence, and a completed Z83 form to the nearest labour centre. All documents must be uploaded to the ESSA online portal by 30 June 2026 for the annual placement cycle.
