Electrician (PE)
Company
Treetop Talent
Location
Gqeberha
Posted
7 days ago
Via
via Pnet
Apply On
Job Description
Introduction
We are recruiting for an Electrician for our client based in PE
Job Purpose
To perform electrical engineering inspections, repairs and maintenance work on equipment, assets and other infrastructure to minimise and prevent failures / breakdowns on production operations.
Key Performance Areas
1. Repairs (45%)
2. Maintenance (15%)
3. Training (10%)
4. Compliance (10%)
5. Cost Control (10%)
6. Customer Service (10%)
Duties & Responsibilities
KEY PERFORMANCE AREAS
REPAIRS (45%)
• Diagnoses root cause of equipment failure and executes plan / takes action to rectify failure by performing repairs in a speedy manner.
• Ensures minimal equipment downtime and damage by repairing faults / defects / failures as speedily as possible.
• Ensures optimal equipment operation by the application of relevant technical and engineering standard, as well as by obtaining manufacturing process approval of equipment's operating condition.
• Ensures that all maintenance job cards raised are closed out on completion of work performed (Shop Ware)
• Supports and liaises with Production by identifying potential problems in a proactive manner as well as resolving process-related problems and planned maintenance to production runs.
• Provides relevant reports to the Maintenance Supervisor on maintenance repairs performed; Production support performed; downtime recorded and ensures paper trail is up to date.
• Root cause analysis performed.
• Failures / defects identified and rectified in a timely manner.
• Equipment downtime and damage minimized.
• Production support rendered – feedback received.
• Operating conditions of equipment optimal.
• Product quality standards upheld and complied with.
• Reports compiled and available in a timely manner (records kept – document control).
• Job Card Completion 100%
MAINTENANCE (15%)
• Perform “first off" inspection (daily check sheets) on all process changes to determine exact state of equipment.
• Perform routine inspections (predictive and planned) to detect possible equipment failures. Make diagnosis and perform the necessary maintenance work.
• Communicates with Supervisors / Production to arrange maintenance time.
• Coordinates availability of parts in order to perform / execute maintenance routines.
• Compile written report to Maintenance Supervisor on ‘out of the ordinary’ conditions.
• Inspection checklists.
• Number of equipment failures / defects reported.
• Equipment failure or damage reported in a timely manner.
• Reactive, Preventative and Predictive maintenance performed.
• Equipment downtime minimized.
• Reports and feedback provided to Supervisors and Production.
TRAINING (10%)
• Assists with training of Apprentices.
• Prepares training machines for Apprentices to ensure successful corrective equipment training.
• Apprentices capable of performing maintenance / repair duties.
• Equipment prepared for training purposes.
• Feedback received.
COMPLIANCE (10%)
• Operates within controls and procedures in order to ensure the integrity of the Company.
• Reports risks or areas of concern to management within area of responsibility.
• Promotes compliance with all relevant regulations and procedures to prevent fruitless, wasteful and irregular expenditure.
• Compliance with applicable regulations and procedures.
• Risks reported to Manager.
• Cost and expenditure monitored – waste minimized.
COST CONTROL (10%)
• Supports the effective and transparent use of financial and other resources.
• Limits expenditure, reduces costs and ensures deviations from budgetary limits are reported to direct Manager.
• Cost and expenditure monitored – waste minimized.
CUSTOMER SERVICE (10%)
• Maintains effective working relationships with employees and customers to render highest quality of services.
• Identifies and solves problems whilst demonstrating a high level of integrity in line with company core values.
• Client / employee satisfaction index.
• Comebacks / discrepancies minimized.
Desired Experience & Qualification
QUALIFICATIONS
MINIMUM
• Grade 12 Certificate (NQF 4).
• Trade Test: Electrician or Millwright (NQF 5)
EXPERIENCE
MINIMUM
• Up to 3 years’ technical and electrical maintenance experience as an Electrician in a manufacturing environment.
TECHNICAL COMPETENCIES
BEHAVIOURAL COMPETENCIES
• Computer Literacy (Basic MS Office; and SAP, ERP Systems and other job-specific software systems).
• Knowledge of relevant maintenance practices / designs / methodologies / SOP’s.
• Housekeeping and safety principles.
• Proactive.
• Action-oriented.
• Problem Solving and Fault Finding skills.
• Flexibility.
• Planning and Organising.
• Customer Focused.
• Resilient.
• Communication skills (both verbal and written).
We are recruiting for an Electrician for our client based in PE
Job Purpose
To perform electrical engineering inspections, repairs and maintenance work on equipment, assets and other infrastructure to minimise and prevent failures / breakdowns on production operations.
Key Performance Areas
1. Repairs (45%)
2. Maintenance (15%)
3. Training (10%)
4. Compliance (10%)
5. Cost Control (10%)
6. Customer Service (10%)
Duties & Responsibilities
KEY PERFORMANCE AREAS
REPAIRS (45%)
• Diagnoses root cause of equipment failure and executes plan / takes action to rectify failure by performing repairs in a speedy manner.
• Ensures minimal equipment downtime and damage by repairing faults / defects / failures as speedily as possible.
• Ensures optimal equipment operation by the application of relevant technical and engineering standard, as well as by obtaining manufacturing process approval of equipment's operating condition.
• Ensures that all maintenance job cards raised are closed out on completion of work performed (Shop Ware)
• Supports and liaises with Production by identifying potential problems in a proactive manner as well as resolving process-related problems and planned maintenance to production runs.
• Provides relevant reports to the Maintenance Supervisor on maintenance repairs performed; Production support performed; downtime recorded and ensures paper trail is up to date.
• Root cause analysis performed.
• Failures / defects identified and rectified in a timely manner.
• Equipment downtime and damage minimized.
• Production support rendered – feedback received.
• Operating conditions of equipment optimal.
• Product quality standards upheld and complied with.
• Reports compiled and available in a timely manner (records kept – document control).
• Job Card Completion 100%
MAINTENANCE (15%)
• Perform “first off" inspection (daily check sheets) on all process changes to determine exact state of equipment.
• Perform routine inspections (predictive and planned) to detect possible equipment failures. Make diagnosis and perform the necessary maintenance work.
• Communicates with Supervisors / Production to arrange maintenance time.
• Coordinates availability of parts in order to perform / execute maintenance routines.
• Compile written report to Maintenance Supervisor on ‘out of the ordinary’ conditions.
• Inspection checklists.
• Number of equipment failures / defects reported.
• Equipment failure or damage reported in a timely manner.
• Reactive, Preventative and Predictive maintenance performed.
• Equipment downtime minimized.
• Reports and feedback provided to Supervisors and Production.
TRAINING (10%)
• Assists with training of Apprentices.
• Prepares training machines for Apprentices to ensure successful corrective equipment training.
• Apprentices capable of performing maintenance / repair duties.
• Equipment prepared for training purposes.
• Feedback received.
COMPLIANCE (10%)
• Operates within controls and procedures in order to ensure the integrity of the Company.
• Reports risks or areas of concern to management within area of responsibility.
• Promotes compliance with all relevant regulations and procedures to prevent fruitless, wasteful and irregular expenditure.
• Compliance with applicable regulations and procedures.
• Risks reported to Manager.
• Cost and expenditure monitored – waste minimized.
COST CONTROL (10%)
• Supports the effective and transparent use of financial and other resources.
• Limits expenditure, reduces costs and ensures deviations from budgetary limits are reported to direct Manager.
• Cost and expenditure monitored – waste minimized.
CUSTOMER SERVICE (10%)
• Maintains effective working relationships with employees and customers to render highest quality of services.
• Identifies and solves problems whilst demonstrating a high level of integrity in line with company core values.
• Client / employee satisfaction index.
• Comebacks / discrepancies minimized.
Desired Experience & Qualification
QUALIFICATIONS
MINIMUM
• Grade 12 Certificate (NQF 4).
• Trade Test: Electrician or Millwright (NQF 5)
EXPERIENCE
MINIMUM
• Up to 3 years’ technical and electrical maintenance experience as an Electrician in a manufacturing environment.
TECHNICAL COMPETENCIES
BEHAVIOURAL COMPETENCIES
• Computer Literacy (Basic MS Office; and SAP, ERP Systems and other job-specific software systems).
• Knowledge of relevant maintenance practices / designs / methodologies / SOP’s.
• Housekeeping and safety principles.
• Proactive.
• Action-oriented.
• Problem Solving and Fault Finding skills.
• Flexibility.
• Planning and Organising.
• Customer Focused.
• Resilient.
• Communication skills (both verbal and written).
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum hourly wage for qualified plumbers in South Africa from 1 March 2026?
The Department of Employment and Labour sets the National Minimum Wage at R28.79 per hour for plumbers as of 1 March 2026. This applies to all Sectoral Determination 13 workers with overtime paid at 1.5 times the rate after 45 hours per week. Employers must display the wage schedule at every workplace.
Which trade test certificate is required to legally work as a plumber in South Africa in 2026?
Candidates must hold a Red Seal trade certificate issued after passing the QCTO trade test at an accredited centre. The certificate number must be registered on the National Artisan Database by 31 December 2025 for 2026 employment. No plumber may be employed without this qualification under the Skills Development Act.
How many annual leave days and sick leave days are plumbers entitled to under the Basic Conditions of Employment Act in 2026?
Plumbers receive 21 consecutive days of paid annual leave after 12 months of employment and 30 days of paid sick leave over a 36-month cycle. The leave must be taken within 6 months after the leave cycle ends or it is forfeited.
What documents must be submitted when applying for a plumber position through the Department of Employment and Labour in 2026?
Applicants must submit a certified ID copy, Red Seal certificate, proof of residence, and a completed Z83 form to the nearest labour centre. All documents must be uploaded to the ESSA online portal by 30 June 2026 for the annual placement cycle.
