Semi-Skilled Plastic Welder
Company
UMULIG ENGINEERING
Location
City of Johannesburg Metropolitan Municipality
Posted
15 days ago
Via
via BeBee
Apply On
Job Description
Semi-Skilled Plastic Welder X 1
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: [email protected] The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: [email protected] The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum hourly wage for qualified plumbers in South Africa from 1 March 2026?
The Department of Employment and Labour sets the National Minimum Wage at R28.79 per hour for plumbers as of 1 March 2026. This applies to all Sectoral Determination 13 workers with overtime paid at 1.5 times the rate after 45 hours per week. Employers must display the wage schedule at every workplace.
Which trade test certificate is required to legally work as a plumber in South Africa in 2026?
Candidates must hold a Red Seal trade certificate issued after passing the QCTO trade test at an accredited centre. The certificate number must be registered on the National Artisan Database by 31 December 2025 for 2026 employment. No plumber may be employed without this qualification under the Skills Development Act.
How many annual leave days and sick leave days are plumbers entitled to under the Basic Conditions of Employment Act in 2026?
Plumbers receive 21 consecutive days of paid annual leave after 12 months of employment and 30 days of paid sick leave over a 36-month cycle. The leave must be taken within 6 months after the leave cycle ends or it is forfeited.
What documents must be submitted when applying for a plumber position through the Department of Employment and Labour in 2026?
Applicants must submit a certified ID copy, Red Seal certificate, proof of residence, and a completed Z83 form to the nearest labour centre. All documents must be uploaded to the ESSA online portal by 30 June 2026 for the annual placement cycle.
