Electrician
Company
Corruseal Group
Location
Springs
Posted
9 days ago
Via
via Pnet
Apply On
Job Description
Introduction
The Electrician will perform electrical work related to preventative maintenance and reactive maintenance on all plant equipment. The Electrician plays a vital role in the task of ensuring maximum machine availability to production. This is accomplished by constantly improving and not just fitting new parts but doing proper RCA on each breakdown to eliminate the cause by applying first time right. The Electrician will assist outside contractors to perform work on plant equipment and new installations. Will have to perform work during over time when plant is shut and also be available for standby as set out on the standby schedule.
Duties & Responsibilities
SAFETY:
• Isolate and report any risk exposure or danger to the Lead Technician.
• Ensure a safe working environment for all personnel surrounding your work area.
• Follow and comply with all the safety rules as prescribed in the company safety policies and do not engage in activities that do not comply.
• Always ensure that your tools are safe for use and do not tamper with any safety devices on equipment or tools.
• Ensure that you have a valid Work-permit with you when engaging in Hot-work, Working at heights, Confined spaces, etc.
• Ensuring that all machines are safe to work on, by implementing the lockout procedure before commencement of work.
AUDITS & INSPECTIONS
• Inspection of tools
• Building electrical installation inspections
• OHS Act inspection lists (ladder inspection, electrical equipment, etc.)
• Plant auditing and running inspections.
• Inspection of fire sprinkler pump house generator and testing.
• Ensure that PM and ATM schedules are conducted.
TECHNICAL SUPPORT
• Support production with difficulties on machine setup and quality issues.
• Assist in faultfinding for electrical and mechanical breakdowns
• Train and share information with Machine Operators at Corruseal.
COMMUNICATION
• Report all machine-related safety issues to Lead Technician.
• Notify the Lead Technician of any spare parts needed and supply correct technical information needed to source and supply parts.
• Build healthy relationships with all staff.
• Responsible for preventing personnel from continuing from engaging in unsafe practices. This applies to contractors and Corruseal personnel.
ADMINISTRATION
• All tasks will be kept up to date daily. This includes job cards, service sheets, leave forms, overtime sheets, etc.
Desired Experience & Qualification
• Matric
• Passed Electrical Trade Test
• Wire-man’s license
• Millwright qualification will be an added advantage
• A PLC related course will be an added advantage
• Must have at least 3 years’ experience in maintenance of a high-speed production plant.
• Need to know about preventative maintenance and planning own work schedule.
• Must know how to set up belt, chain and gearbox drive to change electrical motors.
• Be able to troubleshoot basic mechanical problems like changing bearings.
• Must have good fault finding skills.
The Electrician will perform electrical work related to preventative maintenance and reactive maintenance on all plant equipment. The Electrician plays a vital role in the task of ensuring maximum machine availability to production. This is accomplished by constantly improving and not just fitting new parts but doing proper RCA on each breakdown to eliminate the cause by applying first time right. The Electrician will assist outside contractors to perform work on plant equipment and new installations. Will have to perform work during over time when plant is shut and also be available for standby as set out on the standby schedule.
Duties & Responsibilities
SAFETY:
• Isolate and report any risk exposure or danger to the Lead Technician.
• Ensure a safe working environment for all personnel surrounding your work area.
• Follow and comply with all the safety rules as prescribed in the company safety policies and do not engage in activities that do not comply.
• Always ensure that your tools are safe for use and do not tamper with any safety devices on equipment or tools.
• Ensure that you have a valid Work-permit with you when engaging in Hot-work, Working at heights, Confined spaces, etc.
• Ensuring that all machines are safe to work on, by implementing the lockout procedure before commencement of work.
AUDITS & INSPECTIONS
• Inspection of tools
• Building electrical installation inspections
• OHS Act inspection lists (ladder inspection, electrical equipment, etc.)
• Plant auditing and running inspections.
• Inspection of fire sprinkler pump house generator and testing.
• Ensure that PM and ATM schedules are conducted.
TECHNICAL SUPPORT
• Support production with difficulties on machine setup and quality issues.
• Assist in faultfinding for electrical and mechanical breakdowns
• Train and share information with Machine Operators at Corruseal.
COMMUNICATION
• Report all machine-related safety issues to Lead Technician.
• Notify the Lead Technician of any spare parts needed and supply correct technical information needed to source and supply parts.
• Build healthy relationships with all staff.
• Responsible for preventing personnel from continuing from engaging in unsafe practices. This applies to contractors and Corruseal personnel.
ADMINISTRATION
• All tasks will be kept up to date daily. This includes job cards, service sheets, leave forms, overtime sheets, etc.
Desired Experience & Qualification
• Matric
• Passed Electrical Trade Test
• Wire-man’s license
• Millwright qualification will be an added advantage
• A PLC related course will be an added advantage
• Must have at least 3 years’ experience in maintenance of a high-speed production plant.
• Need to know about preventative maintenance and planning own work schedule.
• Must know how to set up belt, chain and gearbox drive to change electrical motors.
• Be able to troubleshoot basic mechanical problems like changing bearings.
• Must have good fault finding skills.
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum hourly wage for qualified plumbers in South Africa from 1 March 2026?
The Department of Employment and Labour sets the National Minimum Wage at R28.79 per hour for plumbers as of 1 March 2026. This applies to all Sectoral Determination 13 workers with overtime paid at 1.5 times the rate after 45 hours per week. Employers must display the wage schedule at every workplace.
Which trade test certificate is required to legally work as a plumber in South Africa in 2026?
Candidates must hold a Red Seal trade certificate issued after passing the QCTO trade test at an accredited centre. The certificate number must be registered on the National Artisan Database by 31 December 2025 for 2026 employment. No plumber may be employed without this qualification under the Skills Development Act.
How many annual leave days and sick leave days are plumbers entitled to under the Basic Conditions of Employment Act in 2026?
Plumbers receive 21 consecutive days of paid annual leave after 12 months of employment and 30 days of paid sick leave over a 36-month cycle. The leave must be taken within 6 months after the leave cycle ends or it is forfeited.
What documents must be submitted when applying for a plumber position through the Department of Employment and Labour in 2026?
Applicants must submit a certified ID copy, Red Seal certificate, proof of residence, and a completed Z83 form to the nearest labour centre. All documents must be uploaded to the ESSA online portal by 30 June 2026 for the annual placement cycle.
