Mig & Tig Welder
Company
Motus Aftermarket Parts
Location
Pretoria
Posted
3 days ago
Via
Trabajo.org
Apply On
Job Description
**Main purpose of the job**:
Tig and Mig Welding of canopy kit components and canopy Kits
• *Requirements and Experience**
- At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium
- Red seal certificate in welding or minimum 2 years’ experience as per point 1
- Grade 12
- Ability to read, understand and interpret technical drawings
- Clear criminal record
• *Duties and responsibilities**
- Material identification, Interpret technical drawings, jigging and fabrication.
- Preliminary visual inspection of parts to be welded for visible damages
- Reporting of Non-conformance before commencing with welding
- Correct set up of welding machine, welding gas, gauges and clamps
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of pre-assembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily. (Minimum requirements for a 9 hour work shift are as follows per component: Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.
• *Equity Statement
Tig and Mig Welding of canopy kit components and canopy Kits
• *Requirements and Experience**
- At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium
- Red seal certificate in welding or minimum 2 years’ experience as per point 1
- Grade 12
- Ability to read, understand and interpret technical drawings
- Clear criminal record
• *Duties and responsibilities**
- Material identification, Interpret technical drawings, jigging and fabrication.
- Preliminary visual inspection of parts to be welded for visible damages
- Reporting of Non-conformance before commencing with welding
- Correct set up of welding machine, welding gas, gauges and clamps
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of pre-assembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily. (Minimum requirements for a 9 hour work shift are as follows per component: Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.
• *Equity Statement
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum hourly wage for qualified plumbers in South Africa from 1 March 2026?
The Department of Employment and Labour sets the National Minimum Wage at R28.79 per hour for plumbers as of 1 March 2026. This applies to all Sectoral Determination 13 workers with overtime paid at 1.5 times the rate after 45 hours per week. Employers must display the wage schedule at every workplace.
Which trade test certificate is required to legally work as a plumber in South Africa in 2026?
Candidates must hold a Red Seal trade certificate issued after passing the QCTO trade test at an accredited centre. The certificate number must be registered on the National Artisan Database by 31 December 2025 for 2026 employment. No plumber may be employed without this qualification under the Skills Development Act.
How many annual leave days and sick leave days are plumbers entitled to under the Basic Conditions of Employment Act in 2026?
Plumbers receive 21 consecutive days of paid annual leave after 12 months of employment and 30 days of paid sick leave over a 36-month cycle. The leave must be taken within 6 months after the leave cycle ends or it is forfeited.
What documents must be submitted when applying for a plumber position through the Department of Employment and Labour in 2026?
Applicants must submit a certified ID copy, Red Seal certificate, proof of residence, and a completed Z83 form to the nearest labour centre. All documents must be uploaded to the ESSA online portal by 30 June 2026 for the annual placement cycle.
