Urgent: Junior Plumber
Company
Recruite Agency
Location
Kariega
Job Type
Part-time
Posted
2 days ago
Via
via Jooble
Apply On
Job Description
We have an opening for a Junior Plumber at a well-established plumbing firm in Uitenhage, Eastern Cape. This position is suitable for a recently qualified plumber or one nearing the end of apprenticeship seeking further hands-on experience under senior guidance. A structured mentorship programme and registration support is provided.
Responsibilities
Team Supervision & Quality Control
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
• Review completed job cards and site reports to verify that all work has been carried out to specification, materials used are correctly recorded, and the installation is ready for handover and client sign-off with a fully compliant Certificate of Compliance.
• Mentor plumbing apprentices by providing structured on-the-job training in pipefitting, fault diagnosis, reading technical drawings, professional customer communication, and safe work practices to support their preparation for trade testing with the relevant SETA.
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
Installation & Site Execution
• Read and interpret plumbing drawings, isometric diagrams, specifications, and bills of quantities to determine pipe routes, fixture positions, material take-offs, and the correct sequence of installation activities before commencing any work on site.
• Install, connect, and commission water supply, drainage, sanitary fixtures, geysers, and hot water reticulation systems in accordance with SANS 10252 and SANS 10254 plumbing standards and approved building plans for residential and commercial projects.
• Set out and install below-ground drainage networks including sewer and stormwater pipes, inspection chambers, rodding eyes, and grease traps, ensuring correct falls and gradients are maintained to achieve self-cleansing flow velocities as required by building regulations.
Requirements
• Physical fitness to work in confined spaces, at heights, and in environments that may be dirty or unpleasant.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Thorough knowledge of SANS plumbing codes and regulations governing water supply and drainage installations.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
Qualifications
Plumbing Industry Registration Board Registration
Responsibilities
Team Supervision & Quality Control
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
• Review completed job cards and site reports to verify that all work has been carried out to specification, materials used are correctly recorded, and the installation is ready for handover and client sign-off with a fully compliant Certificate of Compliance.
• Mentor plumbing apprentices by providing structured on-the-job training in pipefitting, fault diagnosis, reading technical drawings, professional customer communication, and safe work practices to support their preparation for trade testing with the relevant SETA.
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
Installation & Site Execution
• Read and interpret plumbing drawings, isometric diagrams, specifications, and bills of quantities to determine pipe routes, fixture positions, material take-offs, and the correct sequence of installation activities before commencing any work on site.
• Install, connect, and commission water supply, drainage, sanitary fixtures, geysers, and hot water reticulation systems in accordance with SANS 10252 and SANS 10254 plumbing standards and approved building plans for residential and commercial projects.
• Set out and install below-ground drainage networks including sewer and stormwater pipes, inspection chambers, rodding eyes, and grease traps, ensuring correct falls and gradients are maintained to achieve self-cleansing flow velocities as required by building regulations.
Requirements
• Physical fitness to work in confined spaces, at heights, and in environments that may be dirty or unpleasant.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Thorough knowledge of SANS plumbing codes and regulations governing water supply and drainage installations.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
Qualifications
Plumbing Industry Registration Board Registration
Frequently Asked Questions
Quick answers about Welder Jobs
What is the minimum hourly wage for welders in South Africa from 1 January 2026?
As per the Department of Employment and Labour, the minimum wage for welders in South Africa is R27.85 per hour as of 1 January 2026 under the National Minimum Wage Act. Overtime must be paid at 1.5 times this rate for hours worked beyond 45 per week in the metal industry.
What qualifications and experience does the Department of Employment and Labour require for welder jobs in South Africa?
As per the Department of Employment and Labour, welders must hold a minimum N2 certificate in welding plus 3 years documented experience or a Red Seal trade certificate issued by QCTO. Candidates without these credentials are ineligible for formal sector positions.
Which documents are required when applying for welder jobs through the Department of Employment and Labour in South Africa?
As per the Department of Employment and Labour, applicants must submit a certified ID copy, Red Seal certificate or N2 qualification, proof of 3 years experience, and a valid tax number from SARS. Applications without these four documents are rejected at the labour centre.
What are the legal working hours and annual leave entitlements for welders in South Africa in 2026?
As per the Department of Employment and Labour, welders are limited to 45 ordinary hours per week with 21 consecutive days of paid annual leave after 12 months of service. Public holidays and family responsibility leave of 3 days per year are additional entitlements.
