Semi-Skilled Plastic Welder
Company
UMULIG ENGINEERING
Location
City of Johannesburg Metropolitan Municipality
Posted
15 days ago
Via
via BeBee
Apply On
Job Description
Semi-Skilled Plastic Welder X 1
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: [email protected] The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: [email protected] The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
Frequently Asked Questions
Quick answers about Welder Jobs
What is the minimum hourly wage for welders in South Africa from 1 January 2026?
As per the Department of Employment and Labour, the minimum wage for welders in South Africa is R27.85 per hour as of 1 January 2026 under the National Minimum Wage Act. Overtime must be paid at 1.5 times this rate for hours worked beyond 45 per week in the metal industry.
What qualifications and experience does the Department of Employment and Labour require for welder jobs in South Africa?
As per the Department of Employment and Labour, welders must hold a minimum N2 certificate in welding plus 3 years documented experience or a Red Seal trade certificate issued by QCTO. Candidates without these credentials are ineligible for formal sector positions.
Which documents are required when applying for welder jobs through the Department of Employment and Labour in South Africa?
As per the Department of Employment and Labour, applicants must submit a certified ID copy, Red Seal certificate or N2 qualification, proof of 3 years experience, and a valid tax number from SARS. Applications without these four documents are rejected at the labour centre.
What are the legal working hours and annual leave entitlements for welders in South Africa in 2026?
As per the Department of Employment and Labour, welders are limited to 45 ordinary hours per week with 21 consecutive days of paid annual leave after 12 months of service. Public holidays and family responsibility leave of 3 days per year are additional entitlements.
