Welding | Welder
Company
Feldmeier Equipment Inc.
Location
New York, NY
Job Type
Full-time
Posted
5 days ago
Via
via Jooble
Apply On
Job Description
Description
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the 2026 median hourly wage for licensed plumbers in the United States including overtime?
As per the U.S. Department of Labor, the median hourly wage for plumbers in the United States is $31.45 as of May 2026 with overtime paid at 1.5 times the regular rate after 40 hours. The 10th percentile earns $19.80 per hour and the 90th percentile earns $48.20 per hour under the Fair Labor Standards Act.
What work visa is required for foreign plumbers to work legally in the United States in 2026?
As per U.S. Citizenship and Immigration Services, foreign plumbers must obtain an H-2B visa for non-agricultural temporary work with a maximum of 66,000 visas issued annually for fiscal year 2026. Applicants need a certified temporary labor certification from the Department of Labor valid for up to 10 months.
What education and experience are required to qualify for plumber jobs in the United States in 2026?
As per the U.S. Department of Labor, plumbers need a high school diploma or equivalent plus completion of a 4-5 year apprenticeship program with 8,000-10,000 hours of paid on-the-job training. Most states require 2 years of experience before taking the journeyman licensing exam.
What documents are needed to apply for a plumber position through official U.S. government channels in 2026?
As per the U.S. Department of Labor, applicants must submit a completed ETA-9089 form for permanent labor certification, proof of apprenticeship completion, and a valid state plumbing license. Additional documents include Form I-9 for employment eligibility and W-4 for tax withholding.
