Plumber's Helper

Plumber's Helper


Company
City of New York
Location
Long Island City, NY
Job Type
Full-time
Posted
4 days ago
Via
via Smart Recruiters Jobs

Job Description
Job Description

Under the direction of a Plumber, will assist with emergencies of routine and scheduled plumbing repairs of resident and public space. The duties will include but are not limited to the following:

1. Prepare for PHAS; and correct PHAS deficiencies.
2. Assist Plumber with the following related tasks: perform work relating to the installation, alteration, maintenance and repair of piping of gas, potable water, plumbing, heating and drainage system. Install, maintain, and repair piping for water, gas, storm, waste, soil and vent systems. Set, maintain, and repair plumbing equipment and accessories.
3. Carry tools, working materials and equipment; and prepare the work location. Move heavy valves, piping and fixtures. Cut, drill or prepare openings as maybe necessary for the installation, maintenance or repair of plumbing pipes and fixtures; clean work area.

Notes:
1. Travel throughout the five boroughs is required for this position.
2. This position requires a valid driver's license.

NOTE: The Department of Citywide Administrative Services (DCAS) administered a civil service exam for the Plumber's Helper title on 5/04/2022. Therefore, applicants (candidates) that did not take and pass the exam will potentially not be considered, likewise applicants not reachable on the established civil service list will potentially be in jeopardy of being replaced with an eligible civil service candidate.

NOTE: IF THIS APPOINTMENT IS MADE ON A PROVISIONAL BASIS PURSUANT TO 65 OF THE NYS CIVIL SERVICE LAW, NO TENURE OR PERMANENCE ACCRUES TO AN INCUMBENT IN THIS POSITION BY VIRTUE OF SUCH APPOINTMENT.

NOTE: This position is open to qualified persons with a disability who are eligible for the 55-a Program. Please indicate in your cover letter that you would like to be considered for the position under the 55-a Program. For detailed information regarding the 55-a Program, click on the link below:

http://www.nyc.gov/html/dcas/downloads/pdf/psb/100_1.pdf

Please read this posting carefully to make certain you meet the qualification requirements before applying to this position.

PLUMBER'S HELPER - 91916

Qualifications

1. Three years of full-time satisfactory experience as a plumber's helper or apprentice plumber or;
2. Not less than one year of experience as described in "1" above plus sufficient plumbing training of a relevant nature acquired in an approved trade school, technical school or vocational high school to make up the equivalent of three years of acceptable plumber's helper or apprentice plumber experience. The apprenticeship must be recognized by the New York State Department of Labor, the U.S. Department of Labor or any apprenticeship council which is recognized by the U.S. Department of Labor. The schooling must be approved by a state's Department of Education or a recognized accrediting organization. Each year of approved, relevant training is equivalent to six months of full-time satisfactory plumber's helper or apprentice plumber experience, up to a maximum of two years of satisfactory experience.

Additional Information

The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Frequently Asked Questions

Quick answers about Welder Jobs

Q What is the median hourly wage for welders in the United States as of 2026?
According to the U.S. Bureau of Labor Statistics, the median hourly wage for welders, cutters, solderers, and brazers is $27.50 as of May 2026. The 10th percentile earns $18.75 per hour while the 90th percentile earns $38.20 per hour in the same period.
Q How many hours per week can welders legally work before overtime applies in the United States in 2026?
The U.S. Department of Labor requires overtime pay at 1.5 times the regular rate after 40 hours in a workweek for non-exempt welders under the FLSA as of 2026. Standard shifts are limited to 8 hours per day in most union contracts covering welders.
Q What education and certification are required to qualify for welder jobs in the United States in 2026?
The U.S. Bureau of Labor Statistics states that a high school diploma plus a 6-12 month postsecondary welding certificate is the typical entry requirement as of 2026. AWS D1.1 certification is mandatory for 78 percent of structural welding positions.
Q Which documents are needed to apply for welder positions through official U.S. government workforce channels in 2026?
Applicants must submit Form I-9, state-issued photo ID, and Social Security card to DOL-registered employers as of 2026. Welding certifications and OSHA 10-hour card copies are also required for federal contract jobs.
View all 7 FAQs