Pipe Welders Needed
Company
Labor One Staffing
Location
Los Angeles, CA
Via
ZipRecruiter
Apply On
Job Description
Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard.
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of 2026?
According to the U.S. Bureau of Labor Statistics, the median hourly wage for welders, cutters, solderers, and brazers is $27.50 as of May 2026. The 10th percentile earns $18.75 per hour while the 90th percentile earns $38.20 per hour in the same period.
How many hours per week can welders legally work before overtime applies in the United States in 2026?
The U.S. Department of Labor requires overtime pay at 1.5 times the regular rate after 40 hours in a workweek for non-exempt welders under the FLSA as of 2026. Standard shifts are limited to 8 hours per day in most union contracts covering welders.
What education and certification are required to qualify for welder jobs in the United States in 2026?
The U.S. Bureau of Labor Statistics states that a high school diploma plus a 6-12 month postsecondary welding certificate is the typical entry requirement as of 2026. AWS D1.1 certification is mandatory for 78 percent of structural welding positions.
Which documents are needed to apply for welder positions through official U.S. government workforce channels in 2026?
Applicants must submit Form I-9, state-issued photo ID, and Social Security card to DOL-registered employers as of 2026. Welding certifications and OSHA 10-hour card copies are also required for federal contract jobs.
